Connect Parameters; Procedure - MCK EXTender 6000 Quick Installation Manual

Connect Parameters

The EXTender utilizes a direct serial connection to provide remote user connectivity. This means that the
wide area network (WAN) port is plugged directly into a network device. Use the RVP Direct menu to
identify the WAN port (WAN 1 or WAN 2) that is the main or "primary" port.

Procedure

Before beginning this procedure ensure you have set the Connect Type to RVP_Direct. This item is
located on the Connect menu.
1. Access the Connect Menu from the Main Menu using the following path:
Path: Remote->Configuration->Connect->RVP_Direct
The following menu appears:
2. Press the key and
connects the Remote Unit to the network device.
3. Press the key to scroll through the choices.
4. Press the key to the Secondary Interface parameter. This identifies the secondary WAN port. This
parameter is normally set to None.
5. Press the key to the Utilization parameter. This parameter is a numeric value that represents the
percentage of bandwidth used by the remote unit. Contact the system administrator for more
information on setting this parameter.
key to accept changes and go back to the Configuration Menu. Press the ← key to the
6. Press the
Save option. Press Enter.
EXTender 6000 Quick Installation Guide
Figure 8:
key to the Primary Interface parameter. This is the main WAN port that
RVP_Direct Menu
20