Table of Contents
Advertisement
Chapter 3
Remote Panel Operation
This chapter provides information about various operations with the remote panel.
3.1
Login
Logging in to the LT270 S2 is required to perform an operation with the remote panel. This section explains
the login procedure.
Procedure
1
Specify one of the following URLs on a Web browser to display the start window of the
remote panel:
http:// <IP address specified for the LT270 S2>/
or
https:// <IP address specified for the LT270 S2>/
Use the https URL to connect to the remote panel for the LT270 S2 in which the Key Management
Function Option is used.
When an IP address is set for IPv6, the IP address must be enclosed in brackets [ ].
Example: When the IP address is set as "2001::1", enclose the address with brackets as follows:
Click the [Start] button in the start window of the remote panel. The following login window
is displayed.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
http://[2001::1]/
71
Copyright 2020 FUJITSU LIMITED
P3AM-6932-06ENZ0
Advertisement
Table of Contents
