Chapter 3 Remote Panel Operation
3.11 Setting Library Information
7
The values that have been set are enabled after settings are completed and the LT270 S2 is
restarted.
3.11.2
Setting Information about the Library
This section explains how to set information such as the auto cleaning mode, the auto-inventory function, the
fast-load function, and the number of usable cells.
Procedure
1
Click the [Library] button displayed under [Setup] in the menu frame. The library setting
window will be displayed. If the library settings are already made, its values are displayed.
Figure 3.34 Library information setting window
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
113
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0