Unit Information Display; Table 2.6 Unit Status Information - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation

2.6 Unit Information Display

2.6 Unit Information Display
You can reference the status of various units.
Procedure
1
Click the [Unit Status] button on the Information menu.
INFORMATION menu
+Unit Status
2
The following status information on various units is displayed.
Table 2.6
LCT
Lower Robot
Upper Robot
Drive Cluster#n
DCI#0/#1
Drive Cluster#n
Cluster PSU#0/#1
Shelf FAN#0/#1
Robot PSU#0/#1
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Unit status information
Unit name
Active
Standby
Power Off
Error
Active
Standby
Offline
Error
Power Off
Not Installed
Active
Error
Power Off
Not Installed
Active
Error
FAN Alarm
Power Off
Not Installed
Active
FAN Alarm
Not Installed
Active
Error
FAN Alarm
Power Off
Not Installed
Copyright 2020 FUJITSU LIMITED
Status
The unit is active.
The unit is standby.
The unit is in power-off status.
The unit is in error status.
The unit is active.
The unit is standby.
The unit is disconnected in offline status.
The unit is in error status.
The unit is in power-off status.
The unit is not installed.
The unit is active.
The unit is in error status.
The unit is in power-off status.
The unit is not installed.
The unit is active.
The unit is in error status.
A fan error occurred in the unit.
The unit is in power-off status.
The unit is not installed.
The unit is active.
A fan error occurred in the unit.
The unit is not installed.
The unit is active.
The unit is in error status.
A fan error occurred in the unit.
The unit is in power-off status.
The unit is not installed.
42
P3AM-6932-06ENZ0