Figure 2.9 Drive Information Reference Window (When The Soft Address Is Set) - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.3 Library Information Display
3
The following information about the specified drive is displayed:
• Drive I/F Type: Interface type (Fibre Channel)
• Drive Topology: Topology
Either "Fabric connection" or "Arbitrated Loop" (direct connection) is displayed.
• Drive Addressing Mode: Addressing mode (only on Arbitrated Loop)
Either "Hard Address" or "Soft Address" is displayed.
• Drive LOOP ID: Loop ID of the drive
Displayed only in Hard Address mode.
• Drive Link Speed: Displays the Drive Link Speed settings (Auto Negotiation/1Gbps/2Gbps/4Gbps/
8Gbps). Displayed only in Hard Address mode.
• Drive Type: Displays the host interface type of the drive.
• Drive Vendor ID/Product ID: Drive Vendor ID/Product ID
• Drive Serial No.: Serial number
• Drive WWNN: Adapter worldwide node name
• Drive WWPN: Adapter worldwide port number

Figure 2.9 Drive information reference window (When the Soft Address is set)

FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
33
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0