Loading Cartridges; Figure 3.56 Cas Selection Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.12 Operating the Library
5
Click the [OK] button and then a confirmation window is displayed.
Select the [OK] button if it is OK to proceed.
6
A message indicating that the process is in progress is displayed. A separate window
(showing the progress of processing) displays the number of cleaning cartridges to be
ejected and the number of cleaning cartridges that have been ejected.
7
Cleaning cartridge ejection is complete when an end message is displayed.
3.12.4

Loading Cartridges

This section explains how to load a tape cartridge from a CAS into a drive.
Procedure
1
Select the [Manual Load] button displayed under [Operation]. The following window is
displayed.

Figure 3.56 CAS selection window

2
Select a CAS.
3
The cell map of the specified CAS is displayed. Select a tape cartridge to insert.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
145
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0