Table of Contents
Advertisement
2. Basic Functions
Power Control
Remote Power Operation (Wake On LAN)
Wake On LAN is a function that turns on the ETERNUS AF via a network.
When "magic packet" data is sent from an administration terminal, the ETERNUS AF detects the packet and the
power is turned on.
To perform Wake On LAN, utility software for Wake On LAN such as Systemwalker Runbook Automation is
required and settings for Wake On LAN must be performed.
The MAC address for the ETERNUS AF can be checked on ETERNUS CLI.
ETERNUS Web GUI or ETERNUS CLI can be used to turn off the power of an ETERNUS AF remotely.
Figure 47
Wake On LAN
LAN
ETERNUS AF
Packet transmission
Administration terminal
Wake On LAN utility
92
Design Guide
Advertisement
Table of Contents
