Chapter 3 Remote Panel Operation
3.11 Setting Library Information
3.11.7
Setting the SNMP Agent
The following explains how to set the SNMP agent required for communication with the SNMP manager. The
SNMP server address needs to be specified.
Procedure
1
Click the [SNMP] button displayed under [Setup]. The following window will be displayed. If
the SNMP agent is already set, its values are displayed.
Figure 3.41 SNMP agent setting window
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
125
Copyright 2020 FUJITSU LIMITED
P3AM-6932-06ENZ0