Drive Setup Information; Figure 3.20 Drive Setup Information Display Window; Table 3.16 Drive Setup Information - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.3 Library Information
3.3.4

Drive Setup Information

By clicking the [Drive] button displayed under [Information], setup information for the drive such as Vendor
ID, Product ID, and topology information can be referenced.

Figure 3.20 Drive setup information display window

Table 3.16 Drive setup information

Display item
Drive I/F Type
Topology
Addressing Mode
Drive Link Speed
World Wide Node
Name
World Wide Port Name
Drive Type
Drive Vendor ID
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Displays the host interface type of the drive.
Displays the connection type (Fabric or FC-AL).
Displays the addressing mode (Hard or Soft).
Displays the Link Speed settings of the drive (1 Gbps, 2 Gbps, 4 Gbps, 8Gbps, Auto
Negotiation).
Displays the WWNN of the drive.
Displays the WWPN of the drive.
Displays the host interface type of the drive.
Displays the Vendor ID of the drive.
93
Copyright 2020 FUJITSU LIMITED
Explanation
P3AM-6932-06ENZ0