Library Setting Information; Figure 2.7 Host Interface Information Reference Window (When Al Connection And Soft Address Are Set) - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.3 Library Information Display
Figure 2.7 Host interface information reference window
2.3.3

Library Setting Information

It is possible to reference library information such as configuration information, Vendor ID, Product ID, and
setup information.
Procedure
1
Click the [Library] button from the Information menu.
Information menu
+Library
2
The following information is displayed:
• Temperature/Humidity: Temperature/humidity in the library
• Configuration information
-
-
-
-
• Library setup information
-
-
-
-
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
(When AL connection and Soft Address are set)
Installed Clusters: Number of drive clusters
Installed Drives: Number of installed drives
Installed CASs: Number of available CASs
Installed Cells: Number of user cells (excluding special cells such as cleaning cells)
Vendor ID/Product ID: Library Vendor ID/Product ID (When logical libraries are configured, a
unique Vendor ID and Product ID are assigned to each logical library and displayed in the logical
library configuration information.)
Auto Cleaning: Setup status of the auto cleaning function
Auto Inventory: Setup status of the auto inventory function
Fast Load: Setup status of the fast load function
Copyright 2020 FUJITSU LIMITED
31
End of procedure
P3AM-6932-06ENZ0