Screen Saver Setup; Figure 2.26 Setup Window For Screen Saver Starting Time - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.7 Library Information Setup
2.7.3

Screen Saver Setup

The starting time of the screen saver on the operator panel is set.
Procedure
1
Click the [Screen Saver] button from the Setup menu.
SETUP menu
+Screen Saver
2
For the time (minutes) in which the screen saver activates, select the numeric keypad
button and make an entry using the numeric keypad. When the entry is complete, click the
[Next] button.
The time that can be entered is 1 to 99 minutes.

Figure 2.26 Setup window for screen saver starting time

3
A confirmation window is displayed.
Click the [OK] button if it is OK to proceed.
4
A message indicating that the process is in progress is displayed. The Setup menu is
displayed again when the setting is complete.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
50
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0