Table of Contents
Advertisement
Chapter 3 Remote Panel Operation
3.3 Library Information
Figure 3.18 Host interface setup information display window
Table 3.14 Host interface setup information
Display item
Adapter Card
Status
I/F Type
Topology
Addressing Mode
LOOP ID
Link Speed
World Wide Node
Name
World Wide Port Name
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Indicates the installation status of the host interface:
•
If installed, "Installed" is displayed.
•
If not installed, "Not Installed" is displayed.
Indicates the status of host interface:
•
If operating normally, "Normal" is displayed.
•
If the FC cable is disconnected, "Not Connect" is displayed.
•
If an error occurred, "Error" is displayed.
Indicates the interface type and card type.
Displays the connection form Fabric or FC_AL.
Displays the addressing mode (Hard or Soft). (If Topology is FC_AL)
Indicates LOOP ID (If Addressing Mode is Hard).
Displays the Link Speed settings (Auto Negotiation).
Displays the World Wide Node Name.
Displays the World Wide Port Name.
90
Copyright 2020 FUJITSU LIMITED
Explanation
P3AM-6932-06ENZ0
Advertisement
Table of Contents
