Table 2.9 Cleaning Cartridge Information; Table 2.10 Cleaning Cartridge Status - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.13 Inserting and Ejecting Cleaning Cartridges
3
Specify the cleaning cartridge in the cleaning cell. Click the [Next] button when specifying
the cleaning cartridge to be ejected is complete.
More than one cleaning cartridge can be selected.
Table 2.9
No.
00
01
02
03
04
The cleaning cartridge status is one of the following:

Table 2.10 Cleaning cartridge status

Normal
Limit
Media Error
Invalid
Cell Error
No Label
Unmatch
Only the cleaning cartridges whose status is Normal can be used as cleaning cartridges. Eject cleaning
cartridges whose status is other than Normal.
4
A confirmation window is displayed.
Click the [OK] button if it is OK to proceed.
5
A message indicating that the process is in progress is displayed. The processing-in-progress
message window also displays the number of cleaning cartridges to eject and number of
cleaning cartridges that have been ejected.
6
Cleaning cartridge ejection is complete when an end message is displayed.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Cleaning cartridge information
Barcode Label
CLNI05L1 LTO-C
CLNI04L1 LTO-C
CLNI03L1 LTO-C
CLNI02L1 LTO-C
CLNI01L1 LTO-C
Status
The cartridge can be used.
The usage limit of the cleaning cartridge has expired.
The cleaning cartridge cannot be used due to a media error.
The cartridge cannot be recognized due to a barcode error or the tape
cartridge is not supported.
A cell error occurred.
The tape cartridge does not have a label.
The tape cartridge type indicated on the cartridge label does not match the
tape cartridge information in cartridge memory (CM).
Copyright 2020 FUJITSU LIMITED
Type Count
0/50
0/50
10/50
50/50
40/50
Description
63
Status
Normal
Normal
Normal
Limit
Media ERR
End of procedure
P3AM-6932-06ENZ0