2.
Basic Functions
Power Control
Remote Power Operation (Wake On LAN)
Wake On LAN is a function that turns on the ETERNUS DX via a network.
When "magic packet" data is sent from an administration terminal, the ETERNUS DX detects the
packet and the power is turned on.
To perform Wake On LAN, utility software for Wake On LAN such as Systemwalker Runbook Auto-
mation is required and settings for Wake On LAN must be performed.
The MAC address for the ETERNUS DX can be checked on ETERNUS CLI.
ETERNUS Web GUI or ETERNUS CLI can be used to turn off the power of an ETERNUS DX remote-
ly.
Figure 46 Wake On LAN
LAN
ETERNUS DX
Fujitsu Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Design Guide (Basic)
Packet transmission
87
Copyright 2023 Fujitsu Limited
Administration terminal
Wake On LAN
utility
P3AM-7642-32ENZ0