Figure 2.2 Login Window (Password Input); Table 2.1 Operation Menu For Each Account (Operator Panel) - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.1 Login
2
Enter the password that is set for each account, and then click the [OK] button. The default
password for the administrator account is "admin". The default password for the operator
account is "operate".
When a login operation is complete, the [Logout] button appears in the common button
area.

Figure 2.2 Login window (password input)

The available operation menu on the operator panel depends on the login account type.
Table 2.1 Operation menu for each account (operator panel)
Login account
General user
Administrator
Operator
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Available menu
Status
Status, Setup, Operation
Status, Operation
24
Copyright 2020 FUJITSU LIMITED
End of procedure
Password
-
admin (default)
operate (default)
P3AM-6932-06ENZ0