Executing An Snmp Trap Test - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.11 Setting Library Information
3.11.8

Executing an SNMP Trap Test

After setting up SNMP, a trap test can be executed to confirm that a trap is transmitted to the LT270 S2 with
the specified IP address.
The following trap is test-transmitted:
"Trap for test"
The SNMP settings must be completed before running the SNMP Trap Test.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
128
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0