Figure 3.55 Cleaning Cartridge Selection Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.12 Operating the Library
2
Select the [Eject Cleaning Tape] and the following window is displayed.

Figure 3.55 Cleaning cartridge selection window

3
Use the drop-down list on the "From" side to display the cell map of the CAS for the selected
cabinet. For each cleaning cartridge, the label name (Barcode Label), usage count/available
count (Count), status (Status), and tape cartridge type (Media Type) are displayed. Specify
the cleaning cartridge in the cleaning cell.
4
Use the drop-down list on the "To" side to select the cabinet that contains the cleaning
cartridge that is to be ejected.
A cabinet with a CAS that is set as a User Cell cannot be selected.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
144
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0