Figure 2.4 Logging In To The Remote Panel - Fujitsu ETERNUS LT140 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
Procedure
1
Enter "http://(IP address of the tape library)" in the address bar on the web browser to
access the remote panel.
2
Select [security] from the [User] pull-down menu.
3
For [Password], enter the security administrator account password that was set and click
[Login].
The initial password of the security administrator account is "security".
If the initial password is not changed, change it immediately after logging in to the remote panel.
For details about how to change passwords, refer to
Security Administrator Account" (page

Figure 2.4 Logging in to the remote panel

FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
"2.1.2.1 Changing the Initial Password of the
23).
25
Copyright 2019 FUJITSU LIMITED
End of procedure
P3AG-3762-02ENZ0