Figure 2.27 Password Setting Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.7 Library Information Setup
2.7.4 Password Setup
You can set the administrator password to log in the system.
Procedure
1
Click the [Admin Password] button on the Setup menu.
SETUP menu
+Password
2
Click the numeric keypad button, and enter the new password, and reenter the password for
confirmation. After making the entries, click the [OK] button.

Figure 2.27 Password setting window

3
When password setting is completed, the Setup menu is displayed in the window.
• The default administrator password is "admin".
• When you log in as the administrator, the login button changes to [Admin Logout]. Use the
[Admin Logout] button to log out.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
51
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0