Ejecting The Tape Cartridge From The Trash Cell; Figure 2.39 Selecting The [Trash Eject] Button - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation

2.16 Ejecting the Tape Cartridge from the Trash Cell

2.16 Ejecting the Tape Cartridge from the Trash Cell
Eject the tape cartridge (that has ejected to the trash) from the trash cell to the CAS.
To perform this operation, a tape cartridge must have been ejected into the trash cell.
Procedure
1
Click the [Trash Eject] button on the Operation menu.

Figure 2.39 Selecting the [Trash Eject] button

2
A confirmation window is displayed.
Click the [OK] button if it is OK to proceed.
3
A message indicating that the process is in progress is displayed.
4
An end message appears when ejection of the tape cartridge is completed.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
67
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0