Cas Reassignment; Figure 2.29 Operation Menu Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation

2.8 CAS Reassignment

2.8 CAS Reassignment
When logical libraries are configured, the mounted CAS (CAS#0/#1) can be used as an insertion/ejection slot
from the host by assigning the CAS to the logical library in operation. For use from the operator panel, the CAS
assignment must also be changed.
Procedure
1
In the Operation menu, click the [CAS Assignment] button.

Figure 2.29 Operation menu window

2
A confirmation window is displayed.
Click the [OK] button if it is OK to proceed.
If the CAS has already been assigned to a logical library that is in operation, no operation is required
and therefore, this setting is disabled.
3
When the end message appears, the CAS assignment is complete.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
53
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0