Table 3.34 Snmp Agent Setting Items - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.11 Setting Library Information
2
Set each item.

Table 3.34 SNMP agent setting items

Community
User Name
Authentication
Authentication Mode
Authentication Password
Authentication Password
(Retype)
Encryption
Encryption Mode
Encryption Password
Encryption Password
(Retype)
Destination IP Address
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Display item
Up to five communities set by the SNMP manager can be registered. Though up
to 64 characters can be entered in each text area, only one community can be set
in one text area. Characters that can be entered are alphanumeric characters and
symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}). To remove a setup community
already set, delete the relevant community.
Up to five user names set by the SNMP manager can be registered. Though up to
64 characters can be entered in each text area, only one user name can be set in
one text area. Characters that can be entered are alphanumeric characters and
symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}). To remove a setup community
already set, delete the relevant user name. This item is available if "v3" is speci-
fied for "SNMP Version".
Specify whether authentication is enabled or disabled.
If authentication is enabled, access to the SNMP without the specified authenti-
cation method and password is not permitted.
Specify the authentication method.
Either "SHA" or "MD5" can be selected as the authentication method.
Register a password for authentication.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Enter the password for authentication again.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Specify whether encryption is enabled or disabled.
If encryption is enabled, data is encrypted by the specified encryption method
and password.
Specify the encryption method.
Either "AES" or "DES" can be selected as the encryption method.
Register a password for encryption.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Enter the password for encryption again.
From 8 to 32 characters can be entered.
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Traps will be sent to the IP address specified here.
The IP address can be entered in the text field in either of the following three for-
mats:
•
IPv4 format
Only numeric characters ranging from 0 to 255 can be entered in each text
area of this item.
•
IPv6 format
Alphanumeric characters can be entered.
•
DNS format
Characters that can be entered are alphanumeric characters and symbols
(!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Copyright 2020 FUJITSU LIMITED
Explanation
126
P3AM-6932-06ENZ0