Figure 2.31 Selecting The [Load] Button - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.10 Loading Tape Cartridges
Procedure
1
Click the [Load] button from the Operation menu.

Figure 2.31 Selecting the [Load] button

2
Select a CAS.
OPERATION menu
-Load
+CAS#0
+CAS#1
3
Specify a tape cartridge inside the specified magazine using a CAS cell number.
More than one tape cartridge may be specified.
4
Specify a drive to be loaded.
You can specify as many drives as the tape cartridges specified above.
OPERATION menu
-Load
-CAS#0
-CAS Cell#10
+DRV#01
5
A confirmation window is displayed.
Click the [OK] button if it is OK to proceed.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
56
Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0