Figure 3.12 Drive Cell Tape Cartridge Information Display Window; Table 3.8 Drive Cell Information - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.3 Library Information
3.3.1.3 Referencing the Drive Cell
When you select the [Drive] button and click the [OK] button, drive tape cartridge information is displayed.

Figure 3.12 Drive cell tape cartridge information display window

Table 3.8 Drive cell information
Display item
Drive No.
SCSI Address
Barcode Label
Drive Type
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Indicates a drive number.
Indicates an address of the element used with SCSI.
The barcode label of the tape cartridges stored in the cell is displayed.
•
If the barcode label cannot be identified or no barcode label is affixed, "No_Label" is
displayed.
•
If there is no tape cartridge in the drive, "No_Tape" is displayed.
Indicates the drive type.
If the type cannot be identified, "Unknown" is displayed.
83
Copyright 2020 FUJITSU LIMITED
Explanation
P3AM-6932-06ENZ0