Operating The Trace File; Figure 3.60 Trace File Operation Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.12 Operating the Library
3.12.8

Operating the Trace File

If a hardware error occurs in the library or drive, trace information is automatically stored in a separate file.
During trace file operation, the trace of the file currently being traced is stopped, and the trace of a new trace
file is started. If the host cannot recognize the library or drive, or if the host cannot access the library or drive,
perform a trace file operation that forcibly stores the trace information.
Procedure
1
Click the [Trace] button displayed under [Operation] to display the following window.

Figure 3.60 Trace file operation window

2
To store the trace information, click [OK].
3
A confirmation window is displayed.
Click [OK] to proceed.
4
After processing is completed, the system displays a window showing the processing results,
completing the trace operation.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
152
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0