Library Statuses; Figure 3.5 Normal Window Display (No Errors) (Upper Frame); Figure 3.6 Window Display When There Is An Error (Upper Frame); Table 3.2 Library Status - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.2 Library/Drive Status
3.2.1

Library Statuses

The status of the library can be any of the following.
Table 3.2 Library status
Status
Initializing
Idle
Moving
Checking Inventory
Front Door Opened
Offline
Error
Firmware Updating
Figure 3.5 shows the upper frame of the remote panel when the library has no errors, and
the upper frame when the library has an error.

Figure 3.5 Normal window display (no errors) (upper frame)

Figure 3.6 Window display when there is an error (upper frame)

FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Indicates that the library is being initialized.
Indicates that the library has stopped normally.
Indicates that the robot is operating.
Indicates that the library is taking inventory of the CAS or cells.
Indicates that the front external door is open.
Indicates that the library is offline.
Indicates that an error occurred in the library. The error code is also displayed.
Indicates that the firmware is being updated.
76
Copyright 2020 FUJITSU LIMITED
Explanation
Figure 3.6 shows
P3AM-6932-06ENZ0