Figure 2.4 Reference Window For The Cas Cell Tape Cartridge Information; Table 2.5 Cartridge Information - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.3 Library Information Display
3
In the CAS Map display window, use the [Up/Down] button to switch the page to be
referenced according to the CAS cell number.
The following cartridge information is displayed:
• Barcode Label: Barcode label name
• Type: Tape cartridge type (e.g., LTO-G2)
• Status: Tape cartridge status
Table 2.5
Normal
Media Error
Unusable Cell
Invalid
Cell Error
Limit
No Label
Unmatch

Figure 2.4 Reference window for the CAS cell tape cartridge information

FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Cartridge information
Status
The cartridge can be used.
The cartridge cannot be used due to a media error.
A CIC sensor error occurred in the CAS selected.
The tape cartridge cannot be recognized due to a barcode error or the tape
cartridge is not supported.
A cell error occurred.
The usage limit of the cleaning cartridge has expired.
The tape cartridge does not have a label.
The tape cartridge type indicated on the cartridge label does not match the
tape cartridge information in cartridge memory (CM).
Copyright 2020 FUJITSU LIMITED
Description
28
End of procedure
P3AM-6932-06ENZ0