Table 3.27 Unit Status Information - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 3 Remote Panel Operation
3.9 Status of Various Units

Table 3.27 Unit status information

Unit name
DCT
LAN Hub
LCT
RCT/ROBOT
(Lower/Upper)
Operator Panel
Drive Cluster#n
DCS
Shelf FAN#0/#1/#2
Library PSU#0/#1
PWCT
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
Active The unit is active.
Standby The unit is standby.
Power Off The unit is in power-off status.
Error The unit is in error status.
Active The unit is active.
Power Off The unit is in power-off status.
Error The unit is in error status.
Active The unit is active.
Standby The unit is standby.
Power Off The unit is in power-off status.
Error The unit is in error status.
Active The unit is active.
Standby The unit is standby.
Power Off The unit is in power-off status.
Error The unit is in error status.
Active The unit is active.
Operating The library is being operated from the operator panel.
Calibration The unit is in calibration status.
Power Off The unit is in power-off status.
Not Installed The unit is not installed.
Active The unit is active.
Error The unit is in error status.
Power Off The unit is in power-off status.
Not Installed The unit is not installed.
Active The unit is active.
FAN Alarm A fan error occurred in the unit.
Not Installed The unit is not installed.
Active The unit is active.
Error The unit is in error status.
FAN Alarm A fan error occurred in the unit.
Power Off The unit is in power-off status.
Not Installed The unit is not installed.
Active The unit is active.
Error The unit is in error status.
Power Off The unit is in power-off status.
108
Copyright 2020 FUJITSU LIMITED
Status
P3AM-6932-06ENZ0