Brightness Setting For The Operator Panel; Figure 2.28 Brightness Setting Window - Fujitsu ETERNUS LT270 S2 User's Manual -Panel Operation

Chapter 2 Operator Panel Operation
2.7 Library Information Setup
2.7.5

Brightness Setting for the Operator Panel

The brightness of the operator panel can be set.
Procedure
1
Click the [Brightness] button on the Setup menu.
SETUP menu
+Brightness
2
Click the list button, and then select the brightness. Click the [Next] button after selecting
the brightness setting.

Figure 2.28 Brightness setting window

3
A confirmation window is displayed.
click the [OK] button if it is OK to proceed.
4
If these settings complete successfully, the Setup menu appears again.
Only the setting for the screen brightness on the Setup menu can be changed by general users.
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
52
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0