ABB IRC5 Compact Product Manual page 201

7
8
9
10
11
Refitting
Use the following procedure to refit the line filter.
1
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Action
Remove the two support bracket attach-
ment screws and pull the line filter out
slightly.
Disconnect the cables from L1, L2 and
ground connection on the primary side
of the line filter.
Pull the line filter unit out.
Disconnect the ground cable cable from
the secondary side of the line filter.
Remove the four attachment screws of
the line filter and remove it from the
support bracket.
Action
DANGER
Before any work inside the cabinet, read
the safety information in section
al safety on page 32.
© Copyright 2009-2020 ABB. All rights reserved.
4.19.3 Replacement of line filter
Note/illustration
A
xx1400002849
A Attachment screws for the support
bracket
B L1 and L2 connections
C Ground connection
xx0900000572
A Attachment screws for the line filter
Note/illustration
Electric-
4 Repair
Continued
B
C
Continues on next page
201