ABB IRC5 Compact Product Manual page 177

Refitting
Use the following procedure to refit the line filter.
1
2
3
4
5
6
7
8
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Action
DANGER
Before any work inside the cabin-
et, read the safety information in
section Electrical safety on
page 32.
Refit the brake resistor bleeder
by sliding the recesses in be-
neath the lower attachment
screw heads, and push it inwards
and then downwards.
Refit the upper attachment
screw.
Tighten all the attachment screws
for the bleeder.
Reconnect the bleeder connect-
or.
Refit the fan cover, push it left
towards the grooves.
Refit the attachment screws for
the fan cover, and tighten them.
Perform the function tests in
section Function tests on
page 121 to verify that the safety
features work properly.
© Copyright 2009-2020 ABB. All rights reserved.
4.15 Replacement of brake resistor bleeder
Note/illustration
xx1400001458
A Upper attachment screw
B Lower attachment screws
4 Repair
Continued
A
B
177