ABB IRC5 Compact Product Manual page 200

4 Repair
4.19.3 Replacement of line filter
Continued
Removal
Use the following procedure to remove the line filter.
1
2
3
4
5
6
Continues on next page
200
Action
DANGER
Before any work inside the cabinet, read
the safety information in section
al safety on page 32.
Remove the cover of the cabinet.
Disconnect connector X1 from the sys-
tem power supply.
Disconnect the ground connection.
Disconnect and remove the safety board
unit to be able to access the secondary
side of the line filter.
Disconnect the cables from L1', L2' on
the secondary side of the line filter.
© Copyright 2009-2020 ABB. All rights reserved.
Note/illustration
Electric-
See Opening the IRC5 Compact controller on
page 88.
xx1400002853
A Connector X1
B Ground connection
See Replacement of Connected Services box
on page 180.
A
xx1400002854
A Line filter connections
Product manual - IRC5 Compact
A
B
3HAC047138-001 Revision: M