ABB IRC5 Compact Product Manual page 74

2 Installation and commissioning
2.6.6 Fitting the connector
Continued
3
4
74
Action
Connect the wires according to the illustration. Use a
screwdriver to make the contact tight.
Assemble the connector by fitting the hood and the
female connector, and tighten the screws.
© Copyright 2009-2020 ABB. All rights reserved.
Note/illustration
xx0900000366
For single phase:
• X0.1 - power line
• X0.2 - zero line
• X0.PE - earth wire
Product manual - IRC5 Compact
3HAC047138-001 Revision: M