ABB IRC5 Compact Product Manual page 143

5
6
7
8
9
10
11
12
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Action
Slide the assembly plate with the computer
unit into the cabinet. The computer unit
should rest on guide structure 1. Guide
structure 2 should fit between the assembly
plate and the computer unit.
Make sure the computer unit spring is
clipped on to the structure wall inside the
cabinet.
Tighten the assembly plate attachment
screws.
Fit the axis computer unit so that its latches
fit into the recesses of the assembly plate.
Tighten the axis computer unit attachment
screws.
Reconnect all connectors to the computer
unit.
Refit the cabinet cover.
Perform the function tests in section
tests on page 121 to verify that the safety
features work properly.
© Copyright 2009-2020 ABB. All rights reserved.
4.5 Replacement of computer unit
Note/illustration
xx1500000236
A Guide structure 1
B Guide structure 2
xx1500000233
A Computer unit spring
B Structure wall
Function
4 Repair
Continued
A
B
B
A
143