ABB IRC5 Compact Product Manual page 158

4 Repair
4.9 Replacement of fieldbus adapter in the computer unit
Continued
Refitting
The following procedure details how to refit the fieldbus adapter in the computer
unit.
1
2
3
Continues on next page
158
Action
DANGER
Before any work inside the cabinet, read
the safety information in section
al safety on page 32.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 49.
Fit the fieldbus adapter in position by
pushing the fieldbus adapter along the
rails on the motherboard.
CAUTION
Push carefully so no pins are damaged.
Make sure that the adapter is pushed
straight onto the rails.
© Copyright 2009-2020 ABB. All rights reserved.
Note/Illustrator
Electric-
A
xx1500001755
A Fieldbus adapter
CAUTION
Always grip the fieldbus adapter around the
edges to avoid damage to the adapter or its
components.
Product manual - IRC5 Compact
3HAC047138-001 Revision: M