2
3
4
5
6
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Action
Remove the cover of the cabinet.
Disconnect all connectors from the unit.
Remove the right side beam, according to illustra-
tion.
Remove two attachment screws in the back of the
controller, to loosen support bracket.
Pull the system power supply with support bracket
straight up.
© Copyright 2009-2020 ABB. All rights reserved.
4.19.2 Replacement of system power supply
Note/Illustration
See
Opening the IRC5 Compact
controller on page
A
xx1400001468
•
A: torx counters head
screw (2 pcs)
•
B: torx pan head screw (2
pcs)
•
C: beam
•
D: torx pan head screw
(support)
•
E: support
xx1400001467
Continues on next page
4 Repair
Continued
88.
B
C
D
E
195