Handling the FlexPendant cables
FlexPendant cables are allowed to be rolled up by hand with a minimum bending
radius of 10 times the cable diameter. This also applies to the extension cable. For
example, if the cable is 9.5 mm then it is allowed to roll it with a radius of 95 mm.
Extension cables are not allowed to be used in chains.
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
© Copyright 2009-2020 ABB. All rights reserved.
2 Installation and commissioning
2.6.1.2 Connecting a FlexPendant
Continued
55