4 Repair
4.19.2 Replacement of system power supply
Continued
7
8
9
Refitting
Use the following procedure to refit the system power supply.
1
Continues on next page
196
Action
Loosen the two lower attachment screws.
Remove the two upper attachment screws.
Pull the power supply unit upwards to release it
from the lower screw heads, and remove it.
Action
DANGER
Before any work inside the cabinet, read the safety
information in section
Electrical safety on page
© Copyright 2009-2020 ABB. All rights reserved.
Note/Illustration
A
B
xx0900000570
•
A: upper attachment
screws
•
B: lower attachment screws
Note/Illustration
32.
Product manual - IRC5 Compact
3HAC047138-001 Revision: M