ABB IRC5 Compact Product Manual page 156

4 Repair
4.9 Replacement of fieldbus adapter in the computer unit
Continued
Equipment
AnybusCC DeviceNet slave
fieldbus adapter
Standard toolkit
References
Equipment
Application manual - EtherNet/IP
Anybus Adapter
Application manual - PROFIBUS
Anybus Device
Application manual - PROFINET
Anybus Device
Application manual - DeviceNet
Anybus Slave
Circuit diagram
Removal
The following procedure details how to remove the fieldbus adapter from the
computer unit.
1
2
3
4
5
Continues on next page
156
Action
DANGER
Before any work inside the cabinet, read
the safety information in section
safety on page 32.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before hand-
ling the unit read the safety information in
section The unit is sensitive to ESD on
page 49.
Remove the cover of the cabinet.
Remove the computer unit.
Disconnect any cables to/from the fieldbus
adapter.
© Copyright 2009-2020 ABB. All rights reserved.
Art. no. Note
3HAC045973-001 DSQC1004
DeviceNet communication is de-
scribed in Application manu-
al - DeviceNet Anybus Slave.
The contents are described in
section
page
Art. no. Note
3HAC050997-001 Contains information on how to
configure the system for Ether-
net/IP Fieldbus Adapter DSQC 669.
3HAC050965-001 Contains information on how to
configure the system for PROFIB-
US Fieldbus Adapter DSQC 667.
3HAC050968-001 Contains information on how to
configure the system for
PROFINET Fieldbus Adapter
DSQC 688.
3HAC050993-001 Contains information on how to
configure the system for DeviceNet
Fieldbus Adapter DSQC1004.
See Circuit diagrams
on page 221.
Note/Illustration
Electrical
See Removing the controller cover on
page 88.
See Replacement of computer unit on
page 139.
Product manual - IRC5 Compact
Standard toolkit, IRC5 on
209.
3HAC047138-001 Revision: M