ABB IRC5 Compact Product Manual page 185

7
8
9
10
11
12
13
14
15
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Action
Pull the latch to the left and push the Connected
Services box in position on the mounting bracket.
Connect the cable 3HAC068451-002 to the cable
3HAC068464-002 using the 9-pin connector. Tighten
the screws on both sides. Pin 9 is connected to PE.
Connect the other side of PE to ground.
Refit the safety board unit and secure it with attach-
ment screws.
Reconnect all connectors to the Connected Services
box, Ethernet switch, and safety board.
Connect the antenna to the Connected Services
box.
If needed, remove the sheet metal in the door's up-
per left corner.
Refit the cabinet covers.
Perform the function tests in section
on page 121 to verify that the safety features work
properly.
© Copyright 2009-2020 ABB. All rights reserved.
4.17 Replacement of Connected Services box
Information
xx1800003186
xx1800003651
xx1800003377
xx1900000462
xx1800003372
Function tests
4 Repair
Continued
185