Replacement Of Expansion Board In The Computer Unit - ABB IRC5 Compact Product Manual

4 Repair

4.8 Replacement of expansion board in the computer unit

4.8 Replacement of expansion board in the computer unit
Location
To connect a serial channel or a fieldbus adapter to the controller, the main
computer must be equipped with the expansion board DSQC1003.
The expansion board is located in the computer unit as shown below.
xx1300000860
A
Required equipment
Equipment
Expansion Board
Removal
The following procedure describes how to remove the expansion board from the
computer unit.
1
Continues on next page
152
A
Expansion board with serial channel and one slot for AnybusCC fieldbus adapter.
Action
DANGER
Before any work inside the cabinet, read
the safety information in section
safety on page 32.
© Copyright 2009-2020 ABB. All rights reserved.
Art. no. Note
3HAC046408-001 DSQC1003
Note/Illustration
Electrical
Product manual - IRC5 Compact
3HAC047138-001 Revision: M