ABB IRC5 Compact Product Manual page 187

Removal
Use this procedure to remove the Ethernet switch.
1
2
3
4
5
6
7
8
Product manual - IRC5 Compact
3HAC047138-001 Revision: M
Action
DANGER
Before any work inside the cabinet, read the safety
information in section Electrical safety on page
WARNING
The unit is sensitive to ESD. Before handling the
unit, see The unit is sensitive to ESD on page
On the cabinet front, disconnect the connectors
from the Ethernet switch contacts.
If a Connected Services box is installed, disconnect
the connectors from this as well.
Remove the cover of the cabinet.
Disconnect all connectors from the safety board,
Ethernet switch, and Connected Services box.
Remove the two attachment screws, and push the
safety board unit backwards to release the latches.
Remove the attachment screws, and lift off the
safety board.
Remove the Ethernet switch.
© Copyright 2009-2020 ABB. All rights reserved.
4.18 Replacement of Ethernet switch
Information
32.
49.
A
xx1400002787
A Connected Services con-
tacts
B Ethernet switch contacts
See Opening the IRC5 Compact
controller on page
xx1400001462
xx1500000231
Continues on next page
4 Repair
Continued
B
88.
187