Iec 61850-9-2 Le Sampled Values Sending Smvsender; Functionality; Settings; Iec 61850-9-2 Le Sampled Values Receiving Smvrcv - ABB RELION 620 Series Technical Manual

1MRS757644 F
3.14.1
3.14.1.1
3.14.1.2
Table 63: SMVSENDER Settings
Parameter Values (Range)
Operation 1=on
5=off
3.14.2
3.14.2.1
3.14.2.2
3.14.2.3
620 series
Technical Manual

IEC 61850-9-2 LE sampled values sending SMVSENDER

Functionality

The SMVSENDER function block is used for activating the SMV sending
functionality. It adds/removes the sampled value control block and the related data set
into/from the sending device's configuration. It has no input or output signals.
SMVSENDER can be disabled with the Operation setting value "off". If the
SMVSENDER is disabled from the LHMI, it can only be enabled from the LHMI.
When disabled, the sending of the samples values is disabled.

Settings

Unit

IEC 61850-9-2 LE sampled values receiving SMVRCV

Function block

GUID-4C8D5CAB-ECBC-4FB2-BC8B-06FBF0900D73 V1 EN
Figure 43: Function block
Functionality
The SMVRCV function block is used for activating the SMV receiving functionality.

Signals

Table 64: SMVRCV Output signals
Name
UL1
UL2
UL3
U0
Step Default
1=on
Type
INT32-UL1
INT32-UL2
INT32-UL3
INT32-Uo
Section 3
Basic functions
Description
Operation
Description
IEC61850-9-2 phase 1 voltage
IEC61850-9-2 phase 2 voltage
IEC61850-9-2 phase 3 voltage
IEC61850-9-2 residual voltage
127