Authorization - ABB RELION 620 Series Technical Manual

Section 2
620 series overview
2.4
50
GUID-5166D299-CFBE-499C-8900-6D8B13BCD7F5 V2 EN
Figure 6: Example view of the WHMI
The WHMI can be accessed locally and remotely.
• Locally by connecting the laptop to the protection relay via the front
communication port.
• Remotely over LAN/WAN.

Authorization

Four user categories have been predefined for the LHMI and the WHMI, each with
different rights and default passwords.
The default passwords in the protection relay delivered from the factory can be
changed with Administrator user rights.
If the relay-specific Administrator password is forgotten, ABB can provide a one-time
reliable key to access the protection relay. For support, contact ABB. The recovery of
the Administrator password takes a few days.
User authorization is disabled by default for LHMI but WHMI always
uses authorization.
1MRS757644 F
620 series
Technical Manual