1MRK 504 158-UEN A
1.4.2
Document conventions
•
Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary
also contains definitions of important terms.
•
Push button navigation in the LHMI menu structure is presented by using the push button
icons.
For example, to navigate between the options, use
•
HMI menu paths are presented in bold.
For example, select Main menu/Settings.
•
LHMI messages are shown in Courier font.
For example, to save the changes in non-volatile memory, select Yes and press
•
Parameter names are shown in italics.
For example, the function can be enabled and disabled with the
•
Each function block symbol shows the available input/output signal.
•
•
•
Dimensions are provided both in inches and millimeters. If it is not specifically mentioned
then the dimension is in millimeters.
1.5
IEC 61850 edition 1 / edition 2 mapping
Table 1:
Function block name
AGSAL
ALMCALH
ALTIM
ALTMS
ALTRK
BRCPTOC
BTIGAPC
CCPDSC
CCRBRF
CCSSPVC
CMMXU
CMSQI
CVGAPC
CVMMXN
DPGAPC
DRPRDRE
Table continues on next page
Application manual
the character ^ in front of an input/output signal name indicates that the signal
name may be customized using the PCM600 software.
the character * after an input signal name indicates that the signal must be
connected to another function block in the application configuration to achieve a
valid application configuration.
IEC 61850 edition 1 / edition 2 mapping
Edition 1 logical nodes
AGSAL
SECLLN0
ALMCALH
-
-
-
BRCPTOC
B16IFCVI
CCRPLD
CCRBRF
CCSRDIF
CMMXU
CMSQI
GF2LLN0
GF2MMXN
GF2PHAR
GF2PTOV
GF2PTUC
GF2PTUV
GF2PVOC
PH1PTRC
CVMMXN
DPGGIO
DRPRDRE
GUID-96DFAB1A-98FE-4B26-8E90-F7CEB14B1AB6 v8
and
.
Operation setting.
GUID-C5133366-7260-4C47-A975-7DBAB3A33A96 v3
Edition 2 logical nodes
AGSAL
ALMCALH
ALTIM
ALTMS
ALTRK
BRCPTOC
BTIGAPC
CCPDSC
CCRBRF
CCSSPVC
CMMXU
CMSQI
GF2MMXN
GF2PHAR
GF2PTOV
GF2PTUC
GF2PTUV
GF2PVOC
PH1PTRC
CVMMXN
DPGAPC
DRPRDRE
Section 1
Introduction
.
15