ABB RELION 620 Series Technical Manual page 777

1MRS757644 F
4.11.6
4.11.7
Table 733: MAPGAPC Group settings (Basic)
Parameter Values (Range)
Start value
Start value Add
Operate delay time
Table 734: MAPGAPC Non group settings (Basic)
Parameter Values (Range)
Operation
Operation mode
Table 735: MAPGAPC Non group settings (Advanced)
Parameter Values (Range)
Reset delay time
Absolute hysteresis
620 series
Technical Manual
Signals
Table 731: MAPGAPC Input signals
Name
AI_VALUE
BLOCK
ENA_ADD
Table 732: MAPGAPC Output signals
Name
OPERATE
START
Settings
Unit
-10000.0...10000.0
-100.0...100.0
0...200000 ms
Unit
1=on
5=off
1=Over
2=Under
Unit
0...60000 ms
0.01...100.00
Type Default Description
FLOAT32 0.0 Analogue input value
BOOLEAN 0=False Block signal for activating the blocking mode
BOOLEAN 0=False Enable start added
Type Description
BOOLEAN Operate
BOOLEAN Start
Step Default
0.1 0.0
0.1 0.0
100 0
Step Default
1=on
1=Over
Step Default
100 0
0.01 0.10
Section 4
Protection functions
Description
Start value
Start value Add
Operate delay time
Description
Operation Off / On
Operation mode
Description
Reset delay time
Absolute hysteresis for operation
771