ABB RELION 620 Series Technical Manual page 914

Section 6
Supervision functions
6.6.7
Table 876: MDSOPT Non group settings (Basic)
Parameter
Operation
Warning value
Alarm value
Table 877: MDSOPT Non group settings (Advanced)
Parameter
Initial value
Operating time hour
Operating time mode
6.6.8
6.6.9
908
Table 875: MDSOPT Output signals
Name
ALARM
WARNING
Settings
Values (Range) Unit
1=on
5=off
0...299999 h
0...299999 h
Values (Range) Unit
0...299999 h
0...23 h
1=Immediate
2=Timed Warn
3=Timed Warn Alm
Monitored data
Table 878: MDSOPT Monitored data
Name
MDSOPT
OPR_TIME
Technical data
Table 879: MDSOPT Technical data
Description
Motor runtime measurement accuracy
1) Of the reading, for a stand-alone relay, without time synchronization
Type Description
BOOLEAN Alarm accumulated operation time exceeds Alarm
value
BOOLEAN Warning accumulated operation time exceeds
Warning value
Step Default
1=on
1 8000
1 10000
Step Default
1 0
1 0
1=Immediate
Type Values (Range)
Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
INT32 0...299999
Value
±0.5%
1)
1MRS757644 F
Description
Operation Off / On
Warning value for operation time
supervision
Alarm value for operation time supervision
Description
Initial value for operation time supervision
Time of day when alarm and warning will
occur
Operating time mode for warning and
alarm
Unit Description
Status
h Total operation time in
hours
Technical Manual
620 series