Monitored Data - ABB RELION 620 Series Technical Manual

1MRS757644 F
Table 261: PH3HPTOC Non group settings (Advanced)
Parameter Values (Range)
Minimum operate time
Reset delay time
Measurement mode
Table 262: PH3IPTOC Group settings (Basic)
Parameter Values (Range)
Start value
Start value Mult
Operate delay time
Table 263: PH3IPTOC Non group settings (Basic)
Parameter Values (Range)
Operation
Num of start phases
Table 264: PH3IPTOC Non group settings (Advanced)
Parameter Values (Range)
Reset delay time
4.1.2.9
620 series
Technical Manual
Unit
20...60000 ms
0...60000 ms
1=RMS
2=DFT
3=Peak-to-Peak
Unit
1.00...40.00 xIn
0.8...10.0
20...200000 ms
Unit
1=on
5=off
1=1 out of 3
2=2 out of 3
3=3 out of 3
Unit
0...60000 ms

Monitored data

Table 265: PH3LPTOC Monitored data
Name
START_DUR
PH3LPTOC
Step Default
10 20
10 20
2=DFT
Step Default
0.01 1.00
0.1 1.0
10 20
Step Default
1=on
1=1 out of 3
Step Default
10 20
Type Values (Range)
FLOAT32 0.00...100.00
Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
Section 4
Protection functions
Description
Minimum operate time for IDMT curves
Reset delay time
Selects used measurement mode
Description
Start value
Multiplier for scaling the start value
Operate delay time
Description
Operation Off / On
Number of phases required for operate
activation
Description
Reset delay time
Unit Description
% Ratio of start time /
operate time
Status
257