Setting Ecc800 Cascading - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual
Figure 6-1 Performance parameter setting page
Step 3 Set device performance parameters, select the performance parameters to be submitted in the
first column, set Collecting Data, and click Submit. After the parameters are successfully
submitted,
of parameters that are successfully changed and failed to be changed are displayed beside
Submit.
Step 4 Select the All Configured Data tab page to view the configured device performance
parameters.
----End

6.3 Setting ECC800 Cascading

If multiple smart modules (≤ 3) are installed in the same room and the customer has not
deployed the NetEco, multiple ECC800s can be cascaded for management. To set the
cascading function, follow the procedure in this section.
Prerequisites
Cascaded ECC800s communicate with each other properly.
Context
A maximum of three ECC800s can be cascaded. After the IP addresses of other smart module
ECC800s in the room are added to an ECC800, their active alarms and PUE data can be
displayed and viewed.
You can click links on the cascading management page of the master ECC800 to display the
login pages of the other ECC800s. Then, you can log in to view the details.
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose System Settings > Multi-Module Settings.
Step 3 Click Add. In the displayed New Multi-Module Configuration dialog box, enter the IP
addresses of the ECC800s to be cascaded.
Step 4 Click Confirm.
Issue 07 (2020-03-16)
is displayed in the setting result of the changed parameters, and the numbers
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
162