Bim - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

3.2.18.2 BIM

The BIM is a battery monitoring module that monitors the voltages, internal resistances, and
pole temperatures of batteries and supports 12 V power.
Features



BIM Appearance
Figure 3-44 BIM
Indicators
Table 3-69 Indicator description
Indicator
Running
Alarm
Issue 07 (2020-03-16)
Monitors the voltages, internal resistances, and pole temperatures of 12 V batteries.
Supports the hibernation function. (When it detects that the battery voltage is low, it will
enter the low-power mode.)
Communicates with the CIM wirelessly.
Color Silk
Screen
Green RUN
Red ALM
Copyright © Huawei Technologies Co., Ltd.
Status Description
Off Power consumption is low or the
BIM is not powered on.
Blinking at The networking has started but not
completed.
super short
intervals
Blinking at The networking succeeds.
long intervals
Off The BIM is not faulty.
Steady on  The BIM is faulty.
 Communication with the CIM
times out.
 No network is connected. (The
BIM is waiting to connect to a
3 Device Description
74